NEW! Floor-watering system “EasyLine 2.0"

Turkey Pendulum
Finishing cup

With this enhancement EasyLine 2.0 succeeded in further improving the water supply to the animals and also thereby facilitating accessibility to the nipple. The proven principle with pendulum, bowl and nipple remains unchanged. With the new turkey nipples Art. 4001-4, which are now arranged to the side of the pendulum, we have achieved an even longer service life of the drinker and thus increase the reliability of the water supply even further due to two nipples per cup. Maintenance is made much easier by attaching the double nipple pendulum with a socket pin.

Turkey Pendulum

The principle of the double nipple pendulum:

The pendulum gets directed with the head of the animal at every absorption of water and opened one of the nipples.

The water flows from the 28 mm square pipe down the pendulum into the cup.


Cup with starter ball

For the first days of rearing we recommend the starter ball (Ø 30 mm) to increase the water level in the cup slightly.

The rim of the cup is cleaned by the wattles and neck feathers of the birds at every drinking session. Therefore the optimal height adjustment for the animals is necessary.

for Turkey rearing and finishing

Rearing cup

The central element of the Floor-watering system is the new Turkey-Nipple Art. 4001-4. The combination of the pendulum and the different stainless steel reinforced Drip cups ensures a dry manure and best results for the rearing and fattening for every age of the turkey.

EasyLine 2.0

Basic information about turkey drinker lines

Turkey raising

The LUBING Floor-watering system for turkeys consists of the following elements: Water supply, Drinking elements, Breather unit, Suspension.

1. Water supply:

The Main water supply secures an optimum water quality for a long service life of the nipple drinkers. The water should have the quality of drinking water. At any case the water must be filtered. The water runs from the Main water supply through the Pressure regulator with integrated flush system into the drinking lines. The Pressure regulator is available for front or middle-installations.

2. Drinking Elements:

The drinking lines are supplied in assembled elements of 3 m length. These elements are to be coupled to the length of the house.

3. Breather Unit:

At the end of each drinking line a flush breather unit is installed. All valves of the breather units close during the flushing, which could be started by hand or alternatively by the automatic flush system.

4. Suspension:

The drinking lines are suspended by hangers, which are stuck on the aluminium profiles every 3 m. These hangers are connected with a suspension cable via ceiling pulleys with the central hoisting cable. The drinking line can be adjusted to the desired height by Hand winch or Ceiling winch and can be winched up easily to the ceiling for emptying or cleaning.



EasyLine 2.0

You may also be interested in the following products:


with the main water supplies and the mixers from LUBING



Cooling, Humidifying, Dust binding


Brooder guard

for rearing

Brooder guard